Daft Punk - One More Time FL Studio Remake

About This Video

• Added : 85 days ago |
• Views : 6 |
• Favorites : 0 |
• Links : 0
• Category : Music
• Provider : http://youtube.com
• Description : this is my next remake i had to do ...(more)it its one of my favourite songs ever now to the facts: i used a sample from the song "more spell on you" by eddie johns go search for the chob job of the sample and you will see how i did it the mixing part was quite tricky it took me a few days but the result is nice as far as my ears told me furthermore the main things i used were compressors (side-chain compression), eq's (harsh sound), delay's, reverb's, flanger's, phaser's and more so if someone is going to remake it too here is a mixing list of mine to show you how Daft Punk has done it: 1. Insert Autotune on the vocal track and set it very fast to get that synthy bending effect. Bounce to disk. 2. Import audio and split into section so that you can overlap the begining and end of each line. 3. Insert Compressor and EQ. Dont be shy, try some quite heavy compression 4. EQ the vox to bring out the upper mid presence. Try boosting between 4kHz and 7kHz. Cut the low freqs from 450Hz downwards. 5. Set up an aux send to a Phaser and Delay in series. Set Phaser to modulate quite slowley (around 0.18Hz) and set quite a sharp sweep. If you can, set the sweep freq quite high (2kHz plus) 6. Finally, set a Delay to give you 3/8ths with a small feedback, so you get one audible repeat. Then balance the effects quite low in the mix. (less)